Team BlackSheep Online Store - FLYCOLOR S-TOWER F4 20A & TBS Nanos Bundle
Forgot Password
8-20 characters, no space
Your cart is empty.

FLYCOLOR S-TOWER F4 20A & TBS Nanos Bundle

US$ 99.00

Delivery time: Preorder

FLYCOLOR S-TOWER F4 20A

Flight Controller Features

  • MCU: STM32F405
  • Gyro: MPU-6000 SPI
  • FC firmware: Betaflight_OMNIBUSF4
  • Support PPM, SBUS, SPEKTRUM1024/2048 etc. 
  • FC integrated OSD, users can adjust OSD parameters via Betaflight configurator.
  • FC integrated 3.3V, 5V, 12V, Vbat for receiver, VTX, camera, buzzer, LED and other peripheral devices
  • Provided several cables for peripheral devices such as VTX, camera etc. And will give you an unperedented experience for assembly

ESC Features

  • EFM8BB21F16G MCU, pipelined 8-bit C8051 core with 50MHz maximum speed is limited to 500k eRPM
  • ESC firmware: BL Heli_S, F-H-40
  • Two layers tower structure between 4 in 1 ESC and FC, using cable for quick connection, silicone spacer for supporting could reduce the effect of vibration on Flight Controller, makes the flight more stable
  • Built-in current meter, OSD directly displays the real-time current without any additional connection
  • BL Heli_)S firmware. It is designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation
  • The code supports regular 1-2ms pulse width input, as well as Oneshot125, Oneshot42 and Multishot
  • Support Dshot 150, Dshot 300 and Dshot 600. Dshot is digital signal, anti-interference ability is stronger, and don not need tthrottle calibration.

Install holes: 20*20mm, M2

Crossfire NanoRX

TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering experience, listening to our customer requirements, and pushing ourselves to the maximum (or in this case, the minimum!). The end result is a full range receiver, at the smallest size of any receiver in the industry (yes, it's smaller than the XM+). 

Specifications

  • Weight: 0.5g (receiver only)
  • Size: 11mm x 18mm
  • Requires: Firmware V2.25

Includes

  • 1x TBS Crossfire Nano Receiver
  • 1x TBS Crossfire Micro Receiver Antenna
  • 1x Spare shrink tube
  • 6x 30awg silicon connection wires (2 black, 2 red, 1 white, 1 yellow)
  • 1 x pin header 1x4

TBS Unify Pro Nano 5G8

Size matters!

As builds become smaller and the innovation surrounding brushed and brushless micro quads accelerates, the need for a high-quality VTx increases. TBS has built the smallest VTx possible, focusing purely on size! Sporting the usual Unify Pro pedigree, a newly-revised u.FL connector and the industry-standard Smart Audio support. You will be blown away with the performance in terms of range, signal clarity and signal spacing.

Specifications

  • Input Voltage: 4.5V - 5V
  • Power levels: 25mW / 50mW
  • Interface: SmartAudio and capacitive button (or solder external tactile button separately - included!)
  • Weight: 1.4g (incl. antenna)
  • Size: 13.2mm x 14.6mm
  • Antenna connector: u.FL (upgraded)
  • Antenna length: 45.6mm (end to end)
  • TBS Tech: Smart Audio, Clean Switch

Includes

  • 1x Unify Pro nano 5G8 VTX
  • 1x button switch
  • 1x TBS UNIFY PRO 5G8 Linear Antenna
  • 6x 30awg silicon connection wires (2 black, 2 red, 1 white, 1 yellow)

Manual

WhiteNoiseFpv xTBS Unify/Crossfire Nano Mounting Board 

Features

  • TBS Unify Pro Nano Video Transmitter support
  • 4 plated through holes for mounting receivers
  • Pads for camera pigtail
  • Top or side pads for VTX button
  • 20mm x 20mm hole pattern
  • 27mm x 26mm dimensions



US$ 99.00