Full Graphics OSD
That’s right, everything that is displayed on the OLED will now be mirrored on the micro-displays in the form of an OSD.
There is an entirely new graphical user interface for updating firmware and making custom settings. The module can be powered via USB and used as a real time spectrum analyzer which will appear on your computer’s display.
A small microphone replaces the IR Emitter. The pilot may select this microphone in the settings menu to record pit audio over their DVR footage. This microphone has a low gain and should be adjusted in post production to increase the volume.
For those advanced users, we have made a data pad available that will control a series of LEDs. An external 5v source will be needed and left up to the pilot to tap into. It will be well worth the mod to really push customization options over the top.
Version 4 Diversity module is required with the v4 Main Module in order to utilize the speaker. If you choose not to upgrade your diversity module you will need to remove the speaker on the v2 or Lower Diversity module.
Startup with last saved channel and settings.
Display current channel, call sign, and signal strength.
Calibrate RSSI, set call sign, frequency order, save.
Hold select for 2 seconds in manual mode & Search Mode.
Indicates power, status, and active antenna.
Three Button navigation
Search next channel based on signal strength.
*Scan spectrum of all 40 channels.
Large 470uf tantalum capacitor.
Dual Antenna Filter
1x LaForge Main Module v4
1x Main Module Molded door
1x 90° SMA